Raymarine C Series - Manual (Page 121)

Chapter 5: Using the Fishfinder 107
Note: No matter what size is selected, the Depth Digits will auto-shrink (when neces-
sary) to fit in the available space.
Removing/redisplaying the depth digit
To remove or redisplay the depth digit:
Note: When multiple fishfinder windows are displayed, we recommend that the depth
digit is always displayed in at least one window.
5.5 Marking a position
You can pause the scrolling image to place a waypoint at a position or target that you
want to return to at a later date. When a waypoint is placed, its details are added to the
Waypoint List and a vertical line labelled WPT (see illustration below) is displayed on
screen. You can edit waypoints and navigate to them in the Fishfinder window.
Notes: (1) For full details of working with waypoints, please refer to Chapter 3.
(2) For details of how to pause the scrolling Fishfinder image, see page 106.
D8450_1
MENU
Setup
GPS Status...
Compass Setup...
Enter Fishfinder
Setup menu
Select required digit size
and position
Fishfinder Setup Menu
Depth Digit Position BOTTOM
Target Depth ID OFF
Depth Lines OFF
Color Palette Copper
Scroll MANUAL
Manual Scroll Speed 100%
Fishfinder Setup... Depth Digit Size LARGE
D8452_1
PRESENTATION...
DEPTH DIGITS
ON OFF
OK
Toggle to required status
TRANSDUCER
SETTINGS…
ZOOM… BOTTOM LOCK… A-SCOPE… PRESENTATION…
200 kHz: Auto Gain: Auto High
D6856-2
WPT
WPT
WPT
WPT
WPT
81221_4.book Page 107 Tuesday, February 28, 2006 5:24 PM