Raymarine C Series - Manual (Page 81)

Chapter 4: Using the Chart 67
Viewing details of routes
Details of all routes that you create are held in the Route List. You can:
• View the route list and then select the required route, or
• Select the required route on-screen.
The TIME and SOG options can then be used to aid passage planning by displaying the
time in hours or as an ETA and the SOG as actual or planned.
If the route is currently being navigated to (active), the data is updated to show
bearing, distance and time from your current position.
... via the route list
1. Display the Route List:
2. Display details of the selected route:
... with the cursor
1. Select the route and the REVIEW AND EDIT THIS ROUTE option:
2. Display details of the selected route:
REVIEW AND EDIT
ROUTES…
D8997_1
ROUTES…
Select required route. Details
displayed on right of screen.
D8998_1
Toggle as required
and/or ROUTE DETAILS...
TIME
ETA HOURS
SOG
ACTUAL PLANNED
REVIEW AND EDIT
THIS ROUTE
D9000_1
Position cursor over
any leg of the required
route
81221_4.book Page 67 Tuesday, February 28, 2006 5:24 PM