TOA Electronics D-901 - Manual (Page 22)

22
6.2.4. Utility settings
RS-232C transmission rate settings Control Mode Selection
Preset memory recall
Volume UP
Volume DOWN
Channel ON/OFF
Line (stereo) input selection
Contact input/output settings (p. 65)
(Only when using the D-981 or D-983 Remote Control Module, or
D-984VC VCA Control Module)
(Only when using the D-984VC VCA Control Module)
RS-232C port settings (p. 70)
Module type confirmation (p. 72)
Operation key protection ON/OFF
UTILITY
Utility key
Protect Settings (p. 68)
Stereo Link Settings (p. 61)
Cooling Fan Operating Status
Confirmation
(p. 73)
Gain confirmation for all 12 input channels
Gain confirmation for all 8 output channels
All Input/Output Channel Gain
Confirmation
(p. 71)
VCA status confirmation for all 12 input channels
VCA status confirmation for all 8 output channels
All Input/Output VCA Status
Confirmation
(p. 71)
Firmware Version Confirmation
(p. 73)
Group Settings (p. 61)
NOM Attenuation Settings (p. 64)
Crossover Configuration Settings
(p. 62)
Input Contact Number Selection
Normal make/break
Preset memory recall tally
Channel ON/OFF tally
Contact input status tally
Line (stereo) input selection tally
Output Contact Number Selection
All slots confirmation Individual Slots Confirmation