TOA Electronics D-901 - Manual (Page 32)

32
8.10.2. Ratio settings
[ I N 1 ] C O M P
R A T I O 1 : 1
PARAMETER
PUSH-ENTER
CHANGE
• Rotate the Setting knob to set the ratio.
Parameter setting range: 1:1, 2:1, 3:1, 4:1, 8:1, 12:1, 20:1, INF
(
∞):1
• Pressing an Input channel selector key permits the compression
ratio to be set for that channel. The [IN 1] indication changes to
the selected channel number indication.
8.10.3. Attack time settings
[ I N 1 ] C O M P
A T T A C K 1 0 . 0 m s
PARAMETER
PUSH-ENTER
CHANGE
• Rotate the Setting knob to set the attack time.
Parameter setting range: 0.2 ms – 5 s (Refer to p. 85 for more
information.)
• Pressing an Input channel selector key permits the compression
attack time to be set for that channel. The [IN 1] indication
changes to the selected channel number indication.
8.10.4. Release time settings
[ I N 1 ] C O M P
R E L E A S E 5 0 0 m s
PARAMETER
PUSH-ENTER
CHANGE
• Rotate the Setting knob to set the release time.
Parameter setting range: 10 ms – 5 s (Refer to p. 85 for more
information.)
• Pressing an Input channel selector key permits the compression
release time to be set for that channel. The [IN 1] indication
changes to the selected channel number indication.
8.10.5. Makeup gain settings
[ I N 1 ] C O M P
G A I N + 0 d B
PARAMETER
PUSH-ENTER
CHANGE
• Rotate the Setting knob to set the makeup gain.
Parameter setting range: –INF (–
∞) to +10 dB, in 1 dB steps
• Pressing an Input channel selector key permits the compression
makeup gain to be set for that channel. The [IN 1] indication
changes to the selected channel number indication.