TRENDnet TEG-S3000I - Manual (Page 106)

104
Spanning Tree – System Configuration interface
System Configuration
1. You can view spanning tree information about the Root Bridge.
2. You can view spanning tree status about the switch.
3. You can modify STP state. After modification, click Apply button.
„ Priority: assign path priority number.
„ Max Age: the maximum path age
„ Hello Time: the time that controls switch sends out the BPDU packet to check
STP current status.
„ Forward Delay Time: forward delay time.
Per Port Configuration
You can configure path cost and priority of every port.
1. Select the port in Port column.
Formatted: Bullets and Numbering