TRENDnet TEG-S3000I - Manual (Page 120)

118
switch in the stacking group. And wait for few minutes for the master switch to
communicate and collect the data from the slave switches.
6. Connect to the master switch through the Web. You will see the following screen
display.
7. Click any function in the menu bar of the master switch to configure the switch in
the stacking group. You will see the IP of stacking group list that display the IP and
the switch name.
IP Stacking Finished configuring interface
8. If you want to configure one of switch in stacking group, click the hyper link on the
top of screen and login to the switch that you want to configure. You will see the
screen of the switch that you have selected.