TRENDnet TEG-S3000I - Manual (Page 114)

112
Misc Configuration
1. Quiet period: Set the period during which the port doesn’t try to acquire a
supplicant.
2. TX period: Set the period the port waits to retransmit next EAPOL PDU during an
authentication session.
3. Supplicant timeout: Set the period of time the switch waits for a supplicant
response to an EAP request.
4. Server timeout: Set the period of time the switch waits for a server response to an
authentication request.
5. Max requests: Set the number of authentication that must time-out before
authentication fails and the authentication session ends.
6. Reauth period: Set the period of time after which clients connected must be
re-authenticated.
7. Click Apply .
802.1x Configuration – Misc Configuration interface
TFTP Update Firmware
It provides the functions to allow a user to update the switch firmware. Before updating,
make sure you have your TFTP server ready and the firmware image is on the TFTP