TRENDnet TEG-S3000I - Manual (Page 29)

27
Device Information interface
IP Configuration
You can configure the IP for this switch. The system has the default IP address. You
can re-configure or use the default value.
1. Select the <Edit>
2. DHCP Client: disable or enable the DHCP client function.
3. IP Address: assign the switch IP address. The default IP is 192.168.16.1.
4. Subnet Mask: assign the switch IP subnet mask.
5. Gateway: assign the switch gateway. The default value is 192.168.16.254.
6. Select <Save> action to save the configuration.
Note: Always restart the switch after change the IP address.