TRENDnet TEG-S3000I - Manual (Page 61)

59
LACP Configuration interface
Working Ports Setting
1. Select <Edit>
2. Group: Display the trunk group ID.
3. LACP: Press “Space” key to enable or disable LACP (Link Aggregation Control
Protocol) support. When LACP enable, the group is LACP static trunk group. When
LACP disable, the group is local static trunk group.
4. Working Port Num: The max number of ports can be aggregated at the same time.
If LACP static trunk group, the exceed ports is standby and able to aggregate if
work ports fail. If it is local static trunk group, the number must be the same as
group ports.
5. Select <Save>
NOTE: Before set LACP support, you have to set trunk group on the Trunk
Configuration.