TRENDnet TEG-S3000I - Manual (Page 42)

40
Priority Configuration
You can configure port priority level. There are 0~7-priority level can map to high or low
queue.
1. Select <Edit>.
2. Press “Space” key to select the priority level mapping to high or low queue.
3. Qos Mode: select the mode to process incoming packets.
„ First comes first service: the switch will process the packet that is coming
first.
„ All High Before low: the packet priority is high will be process before the
packet priority is low.
„ Weight Round Ration 2:1: the switch will process 2 high priority packet first,
the process 1 low priority packet.
„ Weight Round Ration 3:1: the switch will process 3 high priority packet first,
the process 1 low priority packet.
„ Weight Round Ration 4:1: the switch will process 4 high priority packet first,
the process 1 low priority packet.
„ Weight Round Ration 5:1: the switch will process 5 high priority packet first,
the process 1 low priority packet.
„ Weight Round Ration 6:1: the switch will process 6 high priority packet first,
the process 1 low priority packet.
„ Weight Round Ration 7:1: the switch will process 7 high priority packet first,
the process 1 low priority packet.
4. Press “ESC” goes back action menu line.
5. Select <Save> to save all configure value.