TRENDnet TEG-S3000I - Manual (Page 35)

33
VLAN Configuration
You can configure VLAN in VLAN Configuration. There are four functions in VLAN
Configuration mode: VLAN Configuration, Create a VLAN Group, Edit/Delete VLAN
Group and Group Sorted Node. Follow the below description to configure VLAN.
VLAN Configuration Main interface
VLAN Configure
Before starting to configure VLAN, you must select the VLAN mode in VLAN Configure
function. Otherwise, user cannot create any new VLAN.
1. Select the <Edit>.
2. Select the VLAN mode by using “Space” key. There are two VLAN modes:
PortBase mode and 802.1Q mode.
„ 802.1Q VLAN mode: configuration VLAN ID, Ingress Filter, and Acceptable
Frame Type.
¾ VLAN ID Range: Type the PVID. The ID range is from 1~255.
¾ Ingress Filter: It matches that Ingress Filtering Rule 1 on web. It
forwards packets with a VID that matches this port’s configured VID. Press
“Space” key to choose forward or drop the frame that VID not matching