TRENDnet TEG-S3000I - Manual (Page 85)

83
Switch Advanced setting interface
„ Priority Queue Service settings: select the priority queue service type.
— First Come First Service: the sequence of packets sent is depend on arrive
order.
— All High before Low: the high priority packets sent before low priority packets.
— Weighted Round Ratio: select the preference given to packets in the switch's
high-priority queue. These options represent the number of high priority
packets sent before one low priority packet is sent. For example, 5 High: 2 Low
means that the switch sends 5 high priority packets before sending 2 low
priority packet.
„ Qos Policy: High Priority Levels: 0~7 priority level can map to high or low queue.