Ethernet switching technology – TRENDnet TEG-S3000I User Manual

Page 11

Advertising
background image

9

„ Rack-mounted kit

„ User Guide

TEG-S3000i chassis switch

Four Rubber Feet RS-232 Cable

Rack-mounted Kit Power Cord User Guide CD-ROM

Figure 1-2. Package Contents

Compare the contents of your TEG-S3000i chassis switch package with the standard

checklist above. IF any item is missing or damaged, please contact your local dealer for

service.

Ethernet Switching Technology

Ethernet Switching Technology dramatically boosted the total bandwidth of a network,

eliminating congestion problems inherent with CSMA/CD (Carrier Sense multiple

access with Collision Detection) protocol and greatly reducing unnecessary

transmissions.

This revolutionized networking. By allowing two-way, simultaneous transmissions over

the same port (Full-duplex), bandwidth was doubled. By reducing the collision domain to

a single switch-port, the need for carrier sensing was eliminated. And by using the

store-and-forward technology’s approach for inspecting each packet to intercept corrupt

or redundant data, unnecessary transmission was eliminated from the network. Switch

technology also employed address learning to replace the inefficient receiving port.

Advertising