TRENDnet TEG-S3000I - Manual (Page 56)

54
SNMP System Options
1. Press <Edit>.
2. Name: assign a name for the switch.
3. Contact: Type the name of contact person or organization.
4. Location: Type the location of the switch.
5. Press “ESC” goes back action menu line.
6. Press <Save> to save configure value.
SNMP System Options interface
Community Strings
„ Add Community Strings
1. Select <Add>
2. Select <Edit>
3. Community Name: type the name of community strings.
4. Write Access: enable the rights is read only or read/write.
„ Read only: Read only, enables requests accompanied by this string to display