TRENDnet TEG-S3000I - Manual (Page 53)

51
STP System Configuration interface
Per Port Setting
1. Select <Edit>.
2. Path Cost: specifies the path cost of the port that switch uses to determine which
port are the forwarding ports.
3. Priority: This is mean port priority; you can make it more or less likely to become
the root port.
4. Press “ESC” goes back action menu line.
5. Select <Save> to save all configure value.
6. On the action menu line you can press <Next Page> to configure port9 ~ port26,
press <Previous Page> return to previous page.