TRENDnet TEG-S3000I - Manual (Page 83)

81
Switch Setting
In Switch setting, it has three parts of setting – Basic, Advance, and Misc Config. We will
describe the configure detail in following.
Basic Switch Settings
In Basic Switch Setting, it displays the switch basic information.
„ System Name: the name of switch.
„ System Location: the switch physical location.
„ System Description: the description of switch.
„ Firmware Version: the switch’s firmware version.
„ Kernel Version: the kernel software version.
„ Hardware version: the switch hardware version.
„ MAC Address: the unique hardware address assigned by manufacturer (default)
„ Fan 1: display fan current status.
„ Fan 2: display fan current status.
„ Module: the module information, if the switch doesn’t install the module, then this
column will not display any information.