Varec TankGate Interface 8315 Series - Manual (Page 95)

8315 TGI Using ViewRTU
Varec, Inc. 85
Figure 7-31:Spreadsheet Mode: Copying and Pasting point parameter data rows.
Note If the number of rows and columns in both selections do not match, the extra copied
cells are truncated. Incompatible cells containing different data types are not copied;
instead a warning is displayed.
Paste & Dnld
The Paste & Dnld option is very similar to the Paste menu selection. The only difference is that
the Paste & Dnld selection downloads the updated data parameters.
Set Value
The Set Value option allows the user to enter or select a value for a parameter.
1. Click on the desired cell or column.
2. Select Set Value from the Edit menu. The Modify Value dialog box appears:
Figure 7-32:Spreadsheet Mode: Editing point parameter values
3. Enter or select a value from the scroll list.
Set Value (with Auto Increment)
This option can also be used for numeric parameters such as channels to auto increment the
value. Follow the procedure below: