Yamaha Professional Audio Workstation AW4416 - Manual (Page 202)

Chapter12—Sampling pads
— Operation Guide
187
Assigning a region to a sampling pad
In order to use the pads to play samples, you must first assign the desired samples
to those pads. There are three ways to assign samples to pads.
1 Assign a desired region from tracks 1–16 of the recorder section
B Import an audio CD track from an internal/external CD-RW drive
C Import a WAV file from a SCSI device
As an example, here’s how to assign a region that was previously recorded on a
track.
1. In the SAMPLING PAD section, press the [EDIT] pad → [F1] key.
The SAMP.PAD screen From Rgn. page will appear, allowing you to assign a
desired region to a pad. This page shows three buttons and the regions recorded
on each track.
The three buttons have the following functions.
1 PAD SEL button
Selects the pad to which the region will be assigned.
B RGN. SEL button
Selects the region.
C EXECUTE button
Executes the assignment of the region to the pad.
1
2
3