Yamaha Professional Audio Workstation AW4416 - Manual (Page 298)

10
— Reference Guide
MASTERING screen
Write CD page
Using a CD-RW drive to create an audio CD
[Function]
Create an audio CD by writing the
stereo track data of songs to CD-R/
RW media as CD audio tracks.
[Key operation]
[MASTERING] key
[Mouse operation]
M button → MAST button
[Screen functions]
A DRIVE
Select the SCSI ID number of the internal or
external CD-RW drive.
B FINALIZE button
When you press this button, CD-R media that
was written using Track At Once will be final-
ized (information on track locations etc. will be
written into the data area). You must perform the
finalize operation in order for CD-R media writ-
ten using Track At Once to be playable on a CD
player.
Tip!
If you used Disc At Once to write the data,
finalize will be performed automatically. For
this reason, the FINALIZE button will be dis-
played only if the TRACK AT ONCE button 3
is turned on.
C TRACK AT ONCE button
D DISC AT ONCE button
Use these buttons to select the way in which
data will be written to the CD-R/RW media
(either Track At Once or Disc At Once). Before
you execute the Write operation, you must
move the cursor to one of these buttons and
press the [ENTER] key.
CD-RW media does not support Track At
Once.
E WRITE SPEED buttons
Use the x1, x2, x4, and x6 buttons to select the
writing speed (normal speed/double speed/
quad speed/x6 speed). Normally you should
select the fastest speed supported by your CD-
RW drive.
1
6
7
L K 8 9 J
5
2
3
4