Yamaha Professional Audio Workstation AW4416 - Manual (Page 484)

Tutorial—Mixdown
— Tutorial
11
1. Make sure that the RECORDER [MONI] MIXING LAYER is selected.
2. Recall the scene number 01 “FADERS NOMINAL” provided to set faders 1
through 14 to nominal (Press the [SCENE] key, use the data dial to select
the scene number 01 “FADERS NOMINAL”, move the cursor to “RECALL”,
press [ENTER], select “OK” in the confirmation and press [ENTER] again).
3. Press the MIXER [VIEW] key so you can see the selected monitor channel
parameters on the display. You might also have to press the [F1] function
key to select the “CH View” page.
4. Hit the [PLAY] button and listen.
The chart below lists the contents of the “So Fine” tracks. “V.Trk” at the left side of
the chart refers to the recorder’s virtual tracks (there are actually 8 virtual tracks
for each recorder track). Note that although we’ll be using only the main tracks
(virtual track 1) for most of this tutorial, an alternate string take is provided on the
second virtual tracks for recorder tracks 9 and 10, and a male lead vocal track is
provided on the second virtual track of recorder track 14. Later on you’ll use
these alternate takes to build a mix based around a male rather than female lead
vocal part.
1 2 3 4 5 6 7 8
V.Trk 1
Drums
Left
Drums
Right
Claves
&
E.Drm
Bass
Rthm
Guitar
Lead
Guitar
Organ Piano
V.Trk 2
9 10 11 12 13 14 15 16
V.Trk 1
String
Left
String
Right
Fem.
Ch. 1
Fem.
Ch. 2
Male
Ch. &
Rap
Lead
Vocal
(Fem)
V.Trk 2
Alt.
String
Left
Alt.
String
Right
Lead
Vocal
(Male)