Yamaha Professional Audio Workstation AW4416 - Manual (Page 378)

90
— Reference Guide
TRACK screen
TR View page
Viewing the recorded content for each track
[Function]
View a bar graph that shows the regions
recorded on each track, and switch the
input monitor mode or mute on/off for
each track.
[Key operation]
• [TRACK] key → [F1] (TR View) key
• Repeatedly press the [TRACK] key until
the screen shown at the right appears
[Mouse operation]
M button → TRAC button → TR View tab
[Screen functions]
A T (track)
This column shows the track number 1–16.
B B (bus)
This column indicates the type of signal that is
sent to the input (recorder input) of each track
1–16. The abbreviations have the following sig-
nificance.
• B1–B8.................Buses 1–8
• D1–D16..............Direct output of input chan-
nels 1–16
C NAME
This column shows the name of the virtual track
currently selected for each track 1–16. When
you record something on a track, a default
name of “V.Tr x-y” (x=track number 1–16,
y=virtual track number 1–8) will be assigned
automatically. Tracks on which nothing has
been recorded will be displayed as “-NO REC-”.
Tip!
Up to 16 characters can be specified as the
name of a virtual track, but only the first eight
characters will be displayed in this column.
The name can be edited in the EDIT screen
TR Edit page.
D V (virtual track)
This column shows the virtual track number (1–
8) that is selected for each track.
Tip!
Virtual tracks are selected in the TRACK
screen V.Track page.
E M (mute)
In this column you can turn muting on/off for
each track. Move the cursor to the 5 column
and press the [ENTER] key to switch muting on
(●) or off (O) for that track.
12 3 45 6 7
J K
8
9