Yamaha Professional Audio Workstation AW4416 - Manual (Page 332)

44
— Reference Guide
VIEW screen
CH View page
View all parameters of a channel
[Function]
This page displays all mix parame-
ters of the selected channel.
Parameters other than EQ and
dynamics can also be edited in this
page.
[Key operation]
• [VIEW] key → [F1] (CH View)
key
• Repeatedly press the [VIEW] key
until the screen shown at the
right appears.
[Mouse operation]
M button → VIEW button → CH
View tab
[Screen functions]
A ATT. (attenuation)
Set the attenuation value.
B PHASE
Switch between normal (N) and
reverse (R) phase.
C EQ (equalizer)
Turn the EQ on/off. This area
also displays a graph showing
the approximate response of
the current EQ settings.
D DYNAMICS
Turn the dynamics processor
on/off. This area also displays a
graph showing the approximate
response of the current dynam-
ics processor settings.
E DELAY
Turn the delay on/off. The delay
time can also be edited here.
F ROUT (routing)
Assign the channel to buses 1–
8 and the stereo bus.
6 8 9
L
M
N
O
K
7 J 2 1
3
4
5
● Input channel/monitor channel
● Paired input channels/monitor channels
6 8 9
L
M
N
O
K
7 J 2 1
3
4
5