Yamaha Professional Audio Workstation AW4416 - Manual (Page 415)

SCENE screen
— Reference Guide
127
RCL. Safe page
Make fader recall safe settings
[Function]
Specify the faders that will be excluded from
the recall when a scene is recalled.
[Key operation]
• [SCENE] key → [F3] (RCL. Safe) key
• Repeatedly press the [SCENE] key until the
screen shown at the right appears.
[Mouse operation]
M button → SCEN button → RCL. Safe tab
[Screen functions]
A RECALL SAFE CHANNEL
If a button in this area is turned on, the fader of
the corresponding channel will maintain its cur-
rent position even when a scene is recalled. The
following channels can be set to Recall Safe sta-
tus.
● Input channels 1–24
● Monitor channels 1–16
● Effect return channels 1/2
● Stereo output channel
Tip!
When a scene is recalled, Fader Recall Safe is
valid only if that scene was saved with the
ENABLE parameter 2 set to ENABLE.
Recall Safe settings are not linked for paired
channels. This means that if one channel of a
pair is set to Recall Safe, the faders of the pair
may be in different positions immediately
after a scene is recalled. However even in
this case, moving one of the faders will cause
the other fader to follow immediately.
B ENABLE
Move the cursor to this button and press the
[ENTER] key to specify whether the Fader Recall
Safe function will be enabled (ENABLE) or not
(DISABLE).
1 2