Import cd-da to an audio track, Cd import page – Yamaha Professional Audio Workstation AW4416 User Manual

Page 397

Advertising
background image

EDIT screen

— Reference Guide

109

CD Import page

Import CD-DA to an audio track

[Function]

Import CD-DA (CD audio) data
from an audio CD/mixed-mode
CD-ROM inserted in the internal
or external CD-RW drive, and
assign it to the desired audio track.

[Key operation]

• [EDIT] key → [F3] (CD Import)

key

• Repeatedly press the [EDIT] key

until the screen shown at the
right appears.

[Mouse operation]

M button → RECORDER EDIT but-
ton → CD Import tab

[Screen functions]

A

DRIVE

Move the cursor to this area and rotate the
[DATA/JOG] dial to select the internal or exter-
nal CD-RW drive.

B

PASTE TO

Select the track number and virtual track num-
ber of the destination track in which the CD-DA
data will be placed.

Since the CD-DA audio data is imported in
stereo, the track number will always be
selected as an odd-numbered/even-num-
bered pair.

C

Destination point

Specify the point in the track at which the
imported CD-DA data will be placed.

Tip!

The units used to specify this point will
change depending on the counter display
method (time/units/measures) selected in the
SONG screen Setting page. If measure dis-
play is selected, “measures” will be the
smallest settable unit.

D

TYPE

Select whether the imported CD-DA data will
be inserted into the track (Insert) or overwritten
(OverWrite). If “Insert” is selected, any subse-
quent audio data in the import destination track
will be moved toward the end of the song by the
length of the inserted audio data.

E

TRACK/TOTAL

This is the track list of the audio CD/mixed-
mode CD-ROM inserted in the CD-RW drive.
Move the cursor to this list and rotate the
[DATA/JOG] dial to select the import source
track.

F

EXTRACT POINT

From the track selected in 5, specify the area
that will be imported in units of “minutes:sec-
onds:frames (1/75 second).” Move the cursor to
this area, and use the [DATA/JOG] dial to set
START (start point) and END (end point).

G

EXECUTE button

This button executes the CD-DA import opera-
tion.

1

5

7

6

2

4

3

Advertising