Yamaha Professional Audio Workstation AW4416 - Manual (Page 387)

— Reference Guide
99
EDIT
EDIT screen
TR Edit page
Edit tracks
[Function]
Assign a name to each track, and edit
audio data by tracks, parts, or regions.
[Key operation]
• RECORDER [EDIT] key → [F1] (TR Edit)
key
• Repeatedly press the RECORDER
[EDIT] key until the screen shown at
the right appears.
[Mouse operation]
M button → RECORDER EDIT button →
TR Edit tab
[Screen functions]
A TRACK menu
B PART menu
C REGION menu
Select one of the following three units of data
that you wish to edit.
● Track
Edit the audio data of the entire currently
selected track (1–16).
● Part
Within the currently selected track, edit the
specified area of audio data.
● Region
Edit a piece of continuous audio data that was
recorded in a single operation.
When you move the cursor to the desired menu
and press the [ENTER] key, a list of buttons will
appear, allowing you to select an editing com-
mand (center column in the illustration at right).
When you then move the cursor to the desired
command and press the [ENTER] key, a list of
buttons for setting the parameters of that com-
mand will appear (right column in the illustra-
tion at right). For details on the commands and parameters
that can be selected from the TRACK/PART/
REGION menus, refer to page 101.
Tip!
If you move the cursor to the command
whose button is highlighted and press the
[ENTER] key, you will return to the command
list. If you move the cursor to the menu high-
lighted at the top of the list and press the
[ENTER] key, you will return to the first
menu.
4
1
2
3
8
5 6 7 9
Menus Commands Parameters