Yamaha Professional Audio Workstation AW4416 - Manual (Page 404)

AUTOMIX screen
116
— Reference Guide
E OVERWRITE
Switch recording on/off for each parameter.
Each button corresponds to the following
parameters.
● FADER
Fader operations of each channel
● CH ON
[ON] key operations of each channel
● PAN
Pan operations of each channel
● EQ
EQ operations of each channel
F FADER EDIT MODE
Select one of the following two ways in which
fader movements recorded in automix will be
edited.
● ABSOLUTE
This is the usual mode, in which previously-
recorded fader events are erased and the new
events recorded.
● RELATIVE
In this mode, the previously-recorded fader
operation events are combined with the new
events and recorded. This is convenient when
you wish to add relative changes to the previ-
ously-recorded fader movements.
When END= on
Previously-recorded
fader movement Fader movement
after editing
Edited fader movement
When RET= on,
END= off
Previously-recorded
fader movement Fader movement
after editing
Edited fader movement
When RET= off,
END= off
Previously-recorded
fader movement Fader movement
after editing
Edited fader movement
RET= on
RET= off