Yamaha Professional Audio Workstation AW4416 - Manual (Page 333)

VIEW screen
— Reference Guide
45
● Return channel
6
L
M
N
O
7 J 2 1
3
5
L
M
O
7 J 1
3
4
● Stereo output channel
VIEW
G PAN
Adjust the panning between the L/
R channels of the stereo bus or
between odd-numbered → even-
numbered buses.
Tip!
If you move the cursor to the
PAN knob and press the
[ENTER] key, the knob will
move to the center position.
H Fader group
This area shows the fader group to
which the channel belongs. You
can also defeat or register groups
in this page.
I Mute group
This area shows the mute group to
which the channel belongs. You
can also defeat or register groups
in this page.
J Input/output meter
This shows the input level of the
input channel, monitor channel,
or return channel, and the output
level of the stereo output channel.
K Pair
This shows the pairing status. Pair-
ing can also be set/defeated in this
page.
L ASSIGN button
Use this button to insert an exter-
nal effect or internal effect into the
channel.
Move the cursor to this button and
press the [ENTER] key to access a
screen like the following.
● OFF button
When this button is on, an effect will not be
inserted.
● INT.EFF 1 button
When this button is on, internal effect 1 will be
inserted into the corresponding channel.
● INT.EFF 2 button
When this button is on, internal effect 2 will be
inserted into the corresponding channel.
When inserting the internal effect 1/2 into a
channel, you must set either EFF1 or EFF2 to
“INSERT” in the SETUP screen Patch IN page.
If neither of the effects is set to “INSERT,”
attempting to turn on the INT.EFF1/INT.EFF2
button in this screen will produce an error
message of “ERROR INT. EFF NOW
SELECTED AUX.”
● EXTERNAL button
When this button is on, you can select the
desired input and output jacks for use as the
insert send/return jacks for the corresponding
channel.