Yamaha Professional Audio Workstation AW4416 - Manual (Page 300)

12
— Reference Guide
CD PLAY screen
CD Play page
Use the CD-RW drive to play an audio CD
[Function]
Use a CD-RW drive connected to
the AW4416 to play back an audio
CD (CD Play function).
[Key operation]
[CD PLAY] key
[Mouse operation]
M button → CD button
[Screen functions]
A DRIVE
Select the SCSI ID number of the internal or
external CD-RW drive.
B CD PLAY MODE button
This button switches the CD Play function on/
off. When the CD PLAY function is on, you can
use the keys of the Transport section to operate
the CD-RW drive.
• While the CD PLAY MODE button 2 is on,
all keys except the [CURSOR] keys, [DATA/
JOG] dial, [ENTER] key, and Transport sec-
tion keys will be disabled.
• The CD audio signal is routed through the
stereo output channel and output from the
STEREO OUT jacks. (Use the STEREO fader
to adjust the volume.) During this time, the
signals of other channels will not be sent to
the stereo output channel.
• For details on the CD Play function, refer to
Operation Guide “Chapter 17. Mastering.”
C Counter
This displays the track number (TRACK) cur-
rently selected in the track list 4, and the
elapsed time of that track (TIME).
D Track list
This list shows the audio track numbers on the
CD (TRACK area), and the times for each track
(TIME area). The currently selected audio track
will be highlighted.
Tip!
You can move the cursor to the track list and
switch the playback track by using the
[DATA/JOG] dial and the [ENTER] key.
4
3
1
2
Key CD-RW drive operation
[PLAY] key Play the CD
[STOP] key Stop the CD
[FF]/[REW] keys Rewind/fast-forward the CD
[ ]/[ ] keys Select tracks