Figure 56 classifier, Table 40 classifier – ZyXEL Communications GS-2724 User Manual
Page 132
Chapter 18 Classifier
GS-2724 User’s Guide
132
Figure 56 Classifier
The following table describes the labels in this screen.
Table 40 Classifier
LABEL
DESCRIPTION
Active
Select this option to enable this rule.
Name
Enter a descriptive name for this rule for identifying purposes.
Packet
Format
Specify the format of the packet. Choices are All, 802.3 tagged, 802.3 untagged,
Ethernet II tagged and Ethernet II untagged.
A value of 802.3 indicates that the packets are formatted according to the IEEE 802.3
standards.
A value of Ethernet II indicates that the packets are formatted according to RFC 894,
Ethernet II encapsulation.
Layer 2
Specify the fields below to configure a layer 2 classifier.
VLAN
Select Any to classify traffic from any VLAN or select the second option and specify the
source VLAN ID in the field provided.
Priority
Select Any to classify traffic from any priority level or select the second option and specify
a priority level in the field provided.