ZyXEL Communications GS-2724 User Manual
Page 239
Chapter 38 Introducing Commands
GS-2724 User’s Guide
239
candidates
Displays cluster candidate
information.
13
member
Displays the MAC address of the
cluster member(s).
13
member config
Displays the configuration of the
cluster member(s).
13
member mac <mac-
addr>
Displays the status of the cluster
member(s).
13
dhcp
relay
Displays DHCP relay settings.
13
server
Displays DHCP server settings.
13
server <vlnd-id>
Displays DHCP server settings in
a specified VLAN.
13
diffserv
Displays general DiffServ settings. 13
garp
Displays GARP information.
13
hardware-monitor <C|F>
Displays current hardware monitor
information with the specified
temperature unit (Celsius C or
Fahrenheit F).
13
https
Displays the HTTPS information.
13
certificate
Displays the HTTPS certificates.
13
key <rsa|dsa>
Displays the HTTPS key.
13
session
Displays current HTTPS
session(s).
13
timeout
Displays the HTTPS session
timeout.
13
igmp-filtering
profile [name]
Displays IGMP filtering profile
settings.
13
igmp-snooping
Displays global IGMP snooping
settings.
13
interface <port-
number>
Displays current interface status.
13
interfaces <port-
list>
Displays current interfaces status. 13
interfaces config
<port-list>
Displays current interface
configuration.
13
bandwidth-control Displays bandwidth control
settings.
13
bstorm-control
Displays broadcast storm control
settings.
13
egress
Displays outgoing port
information.
13
igmp-filtering
Displays IGMP filtering settings.
13
igmp-group-
limited
Displays the IGMP group limit.
13
Table 89 Command Summary: Enable Mode (continued)
COMMAND
DESCRIPTION
PRIVILEG
E