ZyXEL Communications GS-2724 - Manual (Page 233)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
233
Enter exit to quit from the current mode or enter logout to exit the command interpreter.
38.8 Getting Help
The system includes a help facility to provide you with the following information about the
commands:
• List of available commands under a command group.
• Detailed descriptions of the commands.
Command modes that follow are sub-modes of the config mode and can only be accessed from within the config
mode.
Config-vlan This is a sub-mode of the config mode
and allows you to configure VLAN
settings.
Type vlan followed
by a number (between
1 to 4094). For
example, vlan 10 to
configure settings for
VLAN 10.
sysname(config-vlan)#
Config-interface This is a sub-mode of the config mode
and allows you to configure port
related settings.
Type interface
port-channel
followed by a port
number. For example,
i nterface port-
channel 8 to
configure port 8 on the
Switch.
sysname(config-
interface)#
Config-mvr This is a sub-mode of the config mode
and allows you to configure multicast
VLAN settings.
To enter MVR mode,
enter mvr followed by
a VLAN ID (between 1
and 4094). For
example, enter mvr 2
to configure multicast
settings on VLAN 2.
sysname(config-mvr)#
Table 87 Command Interpreter Mode Summary (continued)
MODE . DESCRIPTION
HOW TO LOGIN/
ACCESS
PROMPT