ZyXEL Communications GS-2724 User Manual
Page 254
Chapter 38 Introducing Commands
GS-2724 User’s Guide
254
syslog
Enables syslog logging. 13
server <ip-
address>
inactive
Disables syslog logging to the
specified syslog server.
13
level [0 ~ 7]
Sets the IP address of the syslog
server and the severity level.
13
type <type>
facility [local 1
..7]
Sets the log type and the file
location on the syslog server.
13
time
<Hour:Min:Sec>
Sets the time in hour, minute and
second format.
13
date <month/day/
year>
Sets the date in year, month and
day format.
13
help
Displays help information.
13
timezone <-
1200|...|1200>
Selects the time difference
between UTC (formerly known
as GMT) and your time zone.
13
timesync
<daytime|time|ntp>
Sets the time server protocol.
13
server <ip>
Sets the IP address of your time
server.
13
trunk
<T1|T2|T3|T4|T5|T6
>
Activates a trunk group.
13
<T1|T2|T3|T4|T5|T6
>lacp
Enables LACP for a trunk group.
13
<T1|T2|T3|T4|T5|T6
>interface <port-
list>
Adds a port(s) to the specified
trunk group.
13
interface <port-
list> timeout
<lacp-timeout>
Defines the port number and
LACP timeout period.
13
vlan
<vlan-id>
Enters the VLAN configuration
mode. See
for more information.
13
vlan1q gvrp
Enables GVRP.
13
port-isolation
Enables port-isolation.
13
vlan-
stacking
Enables VLAN stacking on the
Switch.
13
<SPTPID>
Sets the SP TPID (Service
Provider Tag Protocol Identifier).
13
vlan-type <802.1q|port-
based>
Specifies the VLAN type.
13
Table 90 Command Summary: Configuration Mode (continued)
COMMAND
DESCRIPTION
PRIVILEG
E