ZyXEL Communications GS-2724 User Manual
Page 243
Chapter 38 Introducing Commands
GS-2724 User’s Guide
243
classifier <name>
<[packet-
format
<802.3untag|802.3t
ag| EtherIIuntag|
EtherIItag>]
[priority <0-7>]
[vlan <vlan-
id>][ethernet-type
<ether-num|ip|ipx|
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac <src-
mac-addr>]
[source-port
<port-num>]
[destination-mac
<dest-mac-addr>]
[dscp <0-63> ]
[ip-protocol
<protocol-
num|tcp|udp|icmp|e
gp|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip <src-
ip-addr> [mask-
bits <mask-bits>]]
[source-socket
<socket-num>]
[destination-ip
<dest-ip-addr>
[mask-bits <mask-
bits>]]
[destination-
socket <socket-
num>] [inactive]>
Configures a classifier. A
classifier groups traffic into data
flows according to specific
criteria such as the source
address, destination address,
source port number, destination
port number or incoming port
number.
13
help
Displays help information for this
command.
13
cluster <vlan-id>
Enables clustering in the
specified VLAN group.
13
member <mac-
address> password
<password-str>
Sets the cluster member.
13
name <cluster
name>
Sets a descriptive name for the
cluster.
13
rcommand <mac-
address>
Logs into the CLI of the specified
cluster member.
13
default-
management
<in-band|out-of-
band>
Specifies through which traffic
flow the Switch is to send
packets.
13
dhcp
relay
Enables DHCP relay.
13
Table 90 Command Summary: Configuration Mode (continued)
COMMAND
DESCRIPTION
PRIVILEG
E