4 configure vlan port settings, Figure 35 vlan port setting – ZyXEL Communications GS-2724 User Manual
Page 91
Chapter 8 VLAN
GS-2724 User’s Guide
91
8.5.4 Configure VLAN Port Settings
Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a
port. See
for more information on static VLAN. Click the VLAN Port
Setting link in the VLAN Status screen.
Figure 35 VLAN Port Setting
Add
Click Add to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are
done configuring.
Cancel
Click Cancel to reset the fields.
Clear
Click Clear to start configuring the screen again.
VID
This field displays the ID number of the VLAN group. Click the number to edit the
VLAN settings.
Active
This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
Name
This field displays the descriptive name for this VLAN group.
Delete
Click Delete to remove the selected entry from the summary table.
Cancel
Click Cancel to clear the Delete check boxes.
Table 16 Static VLAN (continued)
LABEL
DESCRIPTION