ZyXEL Communications GS-2724 - Manual (Page 240)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
240
igmp-immediate-
leave Displays the IGMP Immediate
Leave setting.
13
igmp-query-mode Displays IGMP query mode for the
specified port.
13
ip Displays IP related information. 13
arp Displays the ARP table. 13
igmp DIsplays the IGMP setting. 13
iptable all
[IP|VID|PORT] Displays the IP address table. You
can sort the table based on the IP
address, VLAN ID or the port
number.
13
iptable count Displays the number of IP
addresses in the IP table.
13
iptable static Displays the status IP address
table.
13
route Displays IP routing information. 13
route static Displays IP static route
information.
13
tcp Displays IP TCP information. 13
udp Displays IP UDP information. 13
lacp Displays LACP (Link Aggregation
Control Protocol) settings.
13
logging Displays system logs. 13
loginPrecedence Displays login precedence
settings.
13
logins Displays login account
information.
13
mac address-table
<all
[mac|vid|port]> Displays MAC address table.
You can sort by MAC address,
VID or port.
13
address-table
static Displays static MAC address
table.
13
address-table
count Displays the number of entries in
the MAC address table.
13
mac-aging-time Displays MAC learning aging
time.
13
mac-count Displays the count of MAC
addresses learnt.
13
mrstp <tree-
index> Displays multiple rapid spanning
tree configuration for the specified
tree.
13
multicast Displays multicast settings. 13
multi-login Displays multi-login information 14
mvr DIsplays all MVR settings. 13
Table 89 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E