ZyXEL Communications GS-2724 - Manual (Page 260)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
260
38.12 mvr Commands
The following table lists the mvr commands in configuration mode.
no fixed <port-list> Sets fixed port(s) to normal
port(s).
13
forbidden <port-
list> Sets forbidden port(s) to normal
port(s).
13
inactive Enables the specified VLAN. 13
ip address <ip-
address> <mask> Deletes the IP address and
subnet mask from this VLAN.
13
ip address default-
gateway Deletes the default gateway from
this VLAN.
13
untagged <port-list> Specifies the port(s) you want to
tag all outgoing frames
transmitted with this VLAN
Group ID.
13
normal <port-
list> Specifies the port(s) to
dynamically join this VLAN group
using GVRP
13
untagged <port-
list> Specifies the port(s) you don’t
want to tag all outgoing frames
transmitted with this VLAN
Group ID.
13
Table 93 Command Summary: config-vlan Commands (continued)
COMMAND DESCRIPTION
PRIVILEG
E
Table 94 Command Summary: mvr Commands
COMMAND DESCRIPTION
PRIVILEG
E
mvr <vlan-
id> Enters the MVR (Multicast
VLAN Registration)
configuration mode.
13
exit Exist from the MVR
configuration mode.
13
group <name-str>
start-address
<ip> end-address
<ip> Sets the multicast group range
for the MVR.
13
inactive Disables MVR settings. 13
mode <dynamic|
compatible> Sets the MVR mode (dynamic
or compatible).
13
name <name-str> Sets the MVR name for
identification purposes.
13
no group Disables all MVR group
settings.
13
group <name-str> Disables the specified MVR
group setting.
13
inactive Enables MVR. 13