User and enable mode commands, 1 overview, 2 show commands – ZyXEL Communications GS-2724 User Manual
Page 263: 1 show system-information, Chapter 39 user and enable mode commands, 1 overview 39.2 show commands, User and enable mode commands (263)
GS-2724 User’s Guide
263
C
H A P T E R
39
User and Enable Mode
Commands
This chapter describes some commands which you can perform in the User and Enable modes.
39.1 Overview
The following command examples show how you can use User and Enable modes to diagnose
and manage your Switch.
39.2 show Commands
These are the commonly used
show
commands.
39.2.1 show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and
system up time).
An example is shown next.
sysname# show system-info
System Name : GS-2724
System Contact :
System Location :
Ethernet Address : 00:19:cb:00:11:fa
ZyNOS F/W Version : V3.70(AYC.0)b0 | 03/08/2007
RomRasSize : 2721784
System up Time : 94:49:25 (208e20f ticks)
Bootbase Version : V3.1 | 03/08/2007
ZyNOS CODE : RAS Mar 8 2007 11:23:31
Product Model : GS-2724