3 general configuration mode, Table 90 command summary: configuration mode – ZyXEL Communications GS-2724 User Manual
Page 242
Chapter 38 Introducing Commands
GS-2724 User’s Guide
242
38.11.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
<vlan-id>
Displays the status of the
specified VLAN.
13
vlan-stacking
Displays VLAN stacking settings.
13
vlan1q
gvrp
Displays GVRP settings.
13
port-isolation
Displays port isolation settings.
13
ssh <1|2>
<[user@]dest-ip>
Connects to an SSH server with
the specified SSH version.
13
[command </>]
Connects to an SSH server with
the specified SSH version and
addition commands to be
executed on the server.
13
traceroute <ip|host-name>
[in-band|out-of-
band|vlan <vlan-
id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet
takes to a device.
13
help
Displays help information for this
command.
13
write
memory
Saves current configuration to the
configuration file the Switch is
currently using.
13
<index>
Saves current configuration to the
specified configuration file on the
Switch.
13
Table 89 Command Summary: Enable Mode (continued)
COMMAND
DESCRIPTION
PRIVILEG
E
Table 90 Command Summary: Configuration Mode
COMMAND
DESCRIPTION
PRIVILEG
E
admin-
password
<pw-string>
<confirm-string>
Changes the administrator
password.
14
bandwidth-
control
Enables bandwidth control.
13
bcp-
transparenc
y
Enables Bridge Control Protocol
(BCP) transparency.
13