Accusys ExaSAN SW-08 - Manual (Page 17)

1. Introduction
User Guide Page 1-8
1.3.1 The ExaSAN RAID
Your ExaSAN RAID disk system carton contains the following items:
1. RAID disk system (1 of A08S-PS or A12S2-PS)
2. External PCIe x4 cable (x1)
3. Rear panel key (x1)
4. Re-drive card (x1)
5. Power cord (x1)
6. Power adapter converter (EUx1, Aux1, UKx1)
7. Installation CD (x1)
8. Quick Start Guide (x1)
9. Screw pack (x1, optional, A12S2-PS 2U rack mount only)
10. Low profile bracket (x2, optional, A12S2-PS rack mount only)
1.3.2 The ExaSAN Switch
Your ExaSAN switch carton contains the following items:
1. SW04 or SW08 switch (x1)
2. Power cord, (US or EU or AU or UK, 1.8m x1)
3. Ethernet cable (2m x1)
4. Installation CD (x1), which includes
a. firmware
b. boot code
c. installation package
d. drivers
e. switch and RAID system documentation
f. BIOS/EFI (for the RAID system)
5. Quick Start Guide (hardcopy, x1)
6. Packing list (hardcopy, x1)
In addition, if you ordered a 2U rack mount RAID system, there is an optional switch mounting tray for
mounting it on rack; which you may order separately.
7. Switch rack mount tray (x1, optional, 2U rack mount only)
1.3.3 Other ExaSAN Accessories
The following items are ordered, packaged, and shipped separately from Accusys.
1. Switch HBA cards (quantities vary, model ACS-63200-NT)
2. QSFP cables (type, quantities and lengths vary)
3. Check sections 1.1.2 and 1.1.3 for other necessary equipment and accessories
1.4 Your SW04/08 Switch at a Glance
This section helps you get familiar with the physical appearance of your ExaSAN Compact switch.
1.4.1 ExaSAN Compact Switch
1.4.1.1 Switch SW04/08 Front Panel