Accusys ExaSAN SW-08 - Manual (Page 20)

1. Introduction
reach in, press firmly and release to power
cycle. Press firmly and hold for five seconds
to reset the unit IP to factory-default of
192.168.0.1. If you forgot your switch GUI
user password, contact your Accusys
distributor or local branch office for
assistance.
9 Support Port
Use only when instructed by technical
support personnel. An RS-232 support
cable is required.
10 LAN Port
Standard TCP/IP Ethernet port, for use by
the private Ethernet network.
1.4.1.3 Switch SW08 Rear Panel
The SW08 model is identical to the SW04 model except with one additional row of four Host Module
Ports. In the diagram above, it is the second row of Host Module Ports, just below the first row with
labels “3” and “4.”
1.4.2 ExaSAN PCIe Switch Host Bus Adapter (HBA)
No. Name Description
User Guide Page 1-11