Accusys ExaSAN SW-08 - Manual (Page 39)

4. How to Use
User Guide Page 4-4
4.2.2 Switch GUI Features
This section explains each of the “Config Mode” features.
4.2.2.1 Quick Setup
Note that in order to use Quick Setup to configure your RAID system(s), all the disk trays have to be
installed with identical (brand, model, size) blank HDDs. If that is not the case, or if you have other
specific RAID system configuration considerations and needs, you would have to use the RAIDGuard X
user interface, which comes with your RAID system(s), to manually configure your RAID system(s).
Select “Quick Setup” and “RAIDSet” from the left pan, the “Quick Setup” screen displays as shown
below.