Auto shut-off, 11 auto shut-off, Procedure – Ohaus NBF1A2 Navigator Balances User Manual
Page 39
39
4.11 Auto Shut-Off
An energy saver is incorporated in the balance to prolong battery life and to conserve ac power. A built-in timer in the
balance can be set from 1 to 60 minutes. If the balance is not used or disturbed during the entire timer period, the
balance will shut off after the specified set time . A setting of zero allows continuous battery operation of the balance.
The default setting of the timer is 0. To set a specific time, proceed as follows:
Procedure
• Press the Setup button, CAL is displayed.
• Press
button until AUTOFF is displayed.
• Press Enter button, TIMER is displayed.
• Press Enter button, if a 0 appears, the timer is dis-
abled. If a number other than 0 appears, it indicates
the timer period which was previously set.
• To change the number of minutes the timer is to be
ON, press
or
button, then press Enter
button. SAVED is momentarily displayed followed by
LOCK.
• Press Enter button.
• Select ON or OFF by pressing
or
button,
then press Enter button.
• EXIT is displayed, press Enter button to save setting.
Balance returns to weighing mode.