Ohaus NBF1A2 Navigator Balances - Manual (Page 87)

24
TM
®
Print
Mode
Setup
Units
TM
Enter
On/Off
G/N/T
Zero Tare
Procedure
• Press the Setup button.
• Press button until GLOBAL is displayed.
• Press Enter button to continue, LIST is displayed.
• Press or button until either LIST, RESET,
VER, or EXIT is displayed.
• Press Enter button to continue.
• Press or button and select either YES or
NO for LIST and RESET. When EXIT is selected, ON
or OFF settings are available..
• Press Enter button to save setting.
• Press or button to select next item or EXIT.
• Press Enter button to save.
4.9 Global
This menu contains two functions which can be activated by selecting YES. These functions are: List, and Reset.
The default settings are NO. Global List is a convienent method of examining which parameters are set up in the
balance. The parameters do not show up on the display but print out when selected. When Version is selected, the
software revision of the balance is displayed. Global Reset when set ON will reset
all menus to factory default
settings only if the Lock Switch is set OFF. This is a convienent method of restoring factory settings shown in table on
page 6.
List
This menu can be used to output a listing of current menu settings via the RS232 interface. When YES is selected, all
menu settings will be output either to an external printer or computer. To use this feature, your balance must be
connected to a computer or printer. The default setting is NO.
GLP Cont = Off
GLP on Tare = Off
Print Ref= On
RS232 = 2400: N: 7: 2
LFT is Off
Mode Menu
WEIGH= On
PERCENT= Off
COUNT= Off
Lock Switch is Off
Menu Locks
RS232= Off
READOUT= Off
GLPSET= Off
MODE= On
UNITS= On
PRINT= Off
GLP Data = Off
CAL= On
GLOBAL= On
Enabled Units:
g
NAVIGATOR xxxxxx-xxx
Sr #x.xx OS#x.xx G#x.xx
Time= 12hr 3:19:51 PM
Date= m/d/y 12/01/99
Function = Weigh
ReadOut Menu
Filter= 1
GLP Menu
Time/Date= On
Bal Id= On
User No.= On
Proj No.= On
DIFF= On
Name= On
Print Menu
Auto Print= Off
Interval= 7
Stable Print= On
NU= On
SAMPLE PRINTOUTS
The partial sample shown, indicates the status in the
menus.
Global Reset
RESETTING ALL MENUS
Global Reset, when set to YES (default is NO) will reset all balance menus to factory default settings, this includes
resetting all menu locks to OFF. Global Reset is functional only when the Lock Switch located under the balance is
set to OFF.
DISABLING GLOBAL RESET
The Global Reset function is disabled when Global Reset is set to NO, and the Lock Switch under the balance is set
ON. In this condition, Reset cannot be selected.
VERSION
Displays software revision number for servicing purposes. This number is installed with the balance at the time of
manufacture.
Setup
Use keys to change, press Enter
Change