Ohaus NBF1A2 Navigator Balances - Manual (Page 6)

6
OVERVIEW OF CONTROLS
1
3
4
2
5
6
8
9
10
7
No. Designation Function
1 I On/Off button Power on/off button.
2 Mode button Selects standard weighing, percent, parts counting, animal weighing and checkweighing
modes.
3 Units button Selects weighing units.
4 Setup button Selects various menus: calibration, date, time, readout, GLP data, GLP set, print,
RS232, mode, units, global, custom and auto shut-off.
5 ->O/T<- button When pressed, performs tare or rezero function.
6 button When pressed, travels up through menus.
7 button When pressed, travels to the left through menus.
8 button When pressed, travels to the right through menus.
9 button When pressed, travels down through menus.
10 Enter/Print button When in menus, selects item on display, otherwise prints data.
11 Leveling indicator Indicates leveling position of the balance.
1
11