Ohaus NBF1A2 Navigator Balances - Manual (Page 96)

33
TM
5.5 Service Information
If the Troubleshooting section does not resolve or describe your problem, you will need to contact an authorized
Ohaus Service Agent. For Service assistance in the United States, please call Aftermarket, Ohaus Corporation toll-
free at (800) 526-0659. An Ohaus Product Service Specialist will be available to help you.
5.6 Replacement parts
Description Ohaus Part No.
AC Adapters:
120V US plug for InCal TM models 90524-67
120V US plug 90524-66
230V Euro plug 90524-63
240V UK plug 90524-64
230V Australian plug 90524-65
Pan (610g models) 4.75"/12cm dia. 77262-00
Pan (6100g models ) 5.5" x 6"/14cm x 15cm 300210-01
5.7 Accessories
Description Ohaus Part No.
Calibration Masses - ASTM Class 4 Tolerance:
200g required for 610g Navigator (3 required) 51025-06
2kg required for 6100g Navigator (3 required) 51026-02
Security Device 76288-01
Scoop, gold 4"x 3.5" (10.2cm x 8.9cm) 4590-00
Scoop, black, aluminum 4"x 3.5" (10.2cm x 8.9cm) 4590-30
Scoop, gold, aluminum 2.25"x 3" (5.7cm x 7.6cm) 5077-00
Impact printer, 42 column AS142
Impact printer paper, 5 pack, 2.25" (5.7cm) wide 78204-01
Cable for AS142 printer AS017-06
Cable, PC 25 pin AS017-02
Cable, PC 9 pin AS017-09
5.4 Information Messages (Cont.)
T CLR Indicates that the tare value has been cleared by using the Tare key.
WT>NOM During checkweighing setup, message is shown when under weight is greater than nominal
weight.
WT<NOM During checkweighing setup, message is shown when over weight is less than nominal
weight.
WT>CAP During checkweighing, message is shown when the entered weight is greater than the
capacity of the balance.