6 set-up of an ultrasonic sensor vegason 52k, 1 configure sensor – VEGA VVO VEGA Visual Operating User Manual
Page 14
14
VEGA Visual Operating
Now click to
Measurement loop, then to
Modify.
Set-up of an ultrasonic sensor VEGASON 52K
6 Set-up of an ultrasonic sensor VEGASON 52K
6.1 Configure sensor
Connect the sensor by means of
VEGACONNECT 2 to the PC (as de-
scribed under chapter "3 Instrument
connection“). Then start VVO. When the
sensor had been connected with al-
ready started VVO, push the function
key
F8 on the PC. Then your monitor
should show the following picture. To
configure the sensor, first of all click to
C
onfiguration, then to Measuring sys-
tem.
In this window you can adjust the menu lan-
guage of VEGASON (on MINICOM). For the
meas. unit you can choose bar, psi or kPa.
Click to
Save after you have modified adjust-
ments. When pushing Reset, all modifications
you have carried out on VEGASON (e.g.
adjustment) are reset to factory setting. With
Quit you return to the window "VEGA Visual
Operating“.