VEGA VVO VEGA Visual Operating User Manual
Page 35
Advertising
VEGA Visual Operating
35
Set-up of a signal conditioning instrument VEGAMET 614
In the window "Switching output“ you
determine the mode of the relay outputs
and the switch points. First of all choose
the output number (relay number). Click
to
Save, when you have modified an ad-
justment.
Here you can choose separately for
each of the three outputs (PC/DCS,
VEGADIS, VEGAMET-Display) the
parameter. If under "Conditioning -
Scaling“ a scaling was carried out,
also "Scaled“ can be chosen as pa-
rameter.
The outputs are reset individually or all
together to factory setting.
Advertising