VEGA VVO VEGA Visual Operating - Manual (Page 51)

VEGA Visual Operating 51
General VVO-functions
Probably you have connected several
sensors to one VBUS-line (e.g. to an AV-
card of VEGALOG). It is possible to
save the data of these sensors as group
in one file. Click to
Compile selected
instruments in one file. Enter in the field
beside
Browse a name for the safety
file. The file ending
G01 shows that these
are sensor data. The file ending for
signal conditioning instruments is
E01.
With
Selection of instruments to be
saved you can either click to Save all
instruments, then all listed sensors will
be saved. Or you click (keeping the
Strg-key pushed) only to the serial num-
bers of the listed sensors you want to save.
Serial numbers of
the sensors
If a safety file with several sensors already
exists, data of additional sensors can be
added to this file. In this case click to
Browse and choose the file (e.g. BBB.G01)
in the new window.