VEGA VVO VEGA Visual Operating - Manual (Page 58)

58 VEGA Visual Operating
General VVO-functions
12.11 Simulation
It is often requested to simulate certain levels
or other measured values, e.g. to test con-
nected instruments or components. Click in
the VVO-main menu to
Diagnostics, then
to
Simulation. Choose the measurement
loop, the value of which you want to simu-
late and click to
OK.
In the window "Simulation of outputs“
click to
Start to start the simulation. With
the buttons "
<–“ and "–>“ (or with the
slider control) you can adjust values
between –10 % and 110 %. Click to
Stop to terminate the simulation.
Note:
The simulation mode is not automatically
terminated but remains active until you
switch off!