4 vvo on the cpu-card of vegalog, 5 vvo on the signal conditioning instrument, 6 vvo on vegacom – VEGA VVO VEGA Visual Operating User Manual
Page 7: Instrument connection, Vega visual operating 7, Connect, Rs 232, Vegaconnect 2
VEGA Visual Operating
7
RS 232
RS 232
Instrument connection
3.4 VVO on the CPU-card of
VEGALOG
The PC is connected via a RS 232-cable to
the CPU-card of VEGALOG 571. In this case
a VEGACONNECT 2 is not necessary.
3.5 VVO on the signal conditioning
instrument
VEGAMET 614
+
OK
-
ESC
100
%
CONNECT
2
1
on
Ser. No.
12345678
ESC
OK
-
+
1
2
on
100
%
CONNECT
514 V
1
2
on
CONNECT
514 V
VEGACONNECT 2
As with the sensors, also for connection to a
signal conditioning instrument, a VEGACON-
NECT 2 should be used. It is plugged to the
"CONNECT“-sockets on the front plate of the
signal conditioning instrument.
3.6 VVO on VEGACOM
The PC is connected via a RS 232-cable to
the D-SUB-plug in the front plate of VEGA-
COM 557. Also here, as with VEGALOG,
there is no VEGACONNECT 2 required.
Therefore an access to all instruments is
possible.